Fuel Flow Sensor Gasoline only. One required per engine. Up to 3 engines supported. To get data on Fuel Remaining in the vessel tanks requires a 000-11522-001 Fuel Data Manager.
Outputs:
- Fuel Flow
- Tank Fuel Used
- Trip Fuel Used
- Seasonal Fuel Used
| Cable Length | 10 Ft |
|---|---|
| Fuel Line Diameter | 3/8″ (9.5 mm) Inside Diameter |
| Flow Rate Measured | Optimized for 0.6-45 Gal/hr but can measure outside these values |
| Added Back Pressure to the fuel system | 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr |
| Installation Location | Above the max level of the fuel tank, in-line after the fuel filter and any Y’s or T’s in the line |
| Package contents | Fuel Flow Sensor, N2K T and 2 (two) 1″ hose clamps |
| Fuel Type | Gasoline only. The Fuel Flow Sensor does not operate diesel engine fuel systems. |
| Hole required to route through a bulkhead | 22mm (7/8″) |
| Multiple Fuel Flow sensors possible | Yes |
Kayaks & SUPs
Railblaza Accessories
Life Jackets (PFD)
Electronics
Hike & Camp
Roof Racks & More
Fishing Gear
Apparel And Clothing